Extech Instruments HD600 Podręcznik Użytkownika Pobierz pdf (Strona 4)

HD600–en-GB_V1.4 04/15

Initial Setup

Battery Installation/AC Adaptor

The meter can be powered by one 9V battery or by an AC power adaptor. Before inserting or replacing

the battery and before connecting the AC adaptor, be sure to turn off the meter.

Time and Date Setup

The SETUP mode is used to set the time, date and default measurement range. Once set, the meter

will retain the settings in non-volatile memory. Resetting should not be required.

NOTE: Press the HOLD button at any time during this procedure to save the set data and to return

to normal operation

1. Make sure the meter is OFF to start.

2. Press and hold the SETUP button and then press and release the

power button. Release the SETUP button to enter the setup mode.

3. Press the SETUP button to enter the “minutes” adjustment screen. Press

the LEVEL button to adjust the minutes to the current time.

4. Press the SETUP button to enter the “hour” adjustment screen. Press the

LEVEL button to adjust the hour to the current time.

“h-P” indicates PM and “h-A” indicates AM.

5. Press the SETUP button to enter the “date” adjustment screen. Press the

LEVEL button to adjust the date to the current day.

6. Press the SETUP button to enter the “month” adjustment screen. Press the

LEVEL button to adjust the display to the current month.

7. Press the SETUP button to enter the “year” adjustment screen. Press the

LEVEL button to adjust the display to the current year.

8. To Save and Exit: Press the SETUP button two more times to view the Set

date. Press the HOLD button to Save and Exit the setup mode.

9. To RESET: If the HOLD button is pressed with this rST screen displayed

the time and date will be reset to factory default values.

1 2 3 4 5 6 7 8 9

Brak uwag

Extech Instruments HD600 Podręcznik Użytkownika Strona 4