Extech Instruments 382860 Podręcznik Użytkownika

Przeglądaj online lub pobierz Podręcznik Użytkownika dla Multimetry Extech Instruments 382860. Extech Instruments 382860 User`s guide Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 20
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
User's Guide
True RMS Power MultiMeter
Model 382860
INTRODUCTION
Congratulations on your purchase of the Extech Model 382860 True RMS Power MultiMeter.
Four LCD displays offer four simultaneous readings e.g. during “POWER” measurements,
simultaneous displays of power, current, AC voltage and power factor can be viewed; AUTO
RANGE always selects the correct measuring range to achieve best accuracy; REL
(Relative) function allows the operator to measure a value with respect to a preset reference
value; CMP (Comparator) function allows a comparative measurement to be made (the
upper/lower limits can be defined); MEM (Memory) and RCL (Recall) functions permit 10
measurements to be stored in memory for later recall; AUTO-POWER-OFF extends the life of
the battery by turning off the meter if neither the rotary function switch nor any button is
operated for 12 minutes. The AC Adaptor required for Power measurements is included.
1 382860 Ver. 2.1 09/04
Przeglądanie stron 0
1 2 3 4 5 6 ... 19 20

Podsumowanie treści

Strona 1 - Model 382860

User's Guide True RMS Power MultiMeter Model 382860 INTRODUCTION Congratulations on your purchase of th

Strona 2 - Safety Notes

10 382860 Ver. 2.1 09/04 MEASUREMENT INSTRUCTIONS Voltage AC/DC Measurements (True RMS for AC Voltage)

Strona 3

11 382860 Ver. 2.1 09/04 Resistance Measurements Attention: Make sure all objects, circuits and component

Strona 4

12 382860 Ver. 2.1 09/04 Frequency Measurement Attention: Observe the max. input limits. Never connect v

Strona 5

13 382860 Ver. 2.1 09/04 Temperature Measurement The main display will show the temperature in degrees ce

Strona 6 - METER DESCRIPTION

14 382860 Ver. 2.1 09/04 POWER MEASUREMENTS For the measurement of power, the Power Adaptor (included) is

Strona 7 - OPERATING INSTRUCTIONS

15 382860 Ver. 2.1 09/04 Three Modes of Power Measurement Displays There are three modes of Power Measure

Strona 8

16 382860 Ver. 2.1 09/04 Storing and Clearing Accumulated Measurement Data The meter memorizes accumulate

Strona 9

17 382860 Ver. 2.1 09/04 CMOS Signal Output Your meter is equipped with a “Function Generator” which su

Strona 10 - MEASUREMENT INSTRUCTIONS

18 382860 Ver. 2.1 09/04 PC INTERFACE Hardware Setup Connect the supplied RS-232C cable between the mete

Strona 11

19 382860 Ver. 2.1 09/04 MAINTENANCE Fuse Replacement Remove power to the meter and removal all connecte

Strona 12

2 382860 Ver. 2.1 09/04 Safety Notes • The multimeter is EMC-tested and corresponds to the following EG-

Strona 13

20 382860 Ver. 2.1 09/04 Warranty EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of d

Strona 14 - WARNING

SAFETY SYMBOLS This symbol adjacent to another symbol, terminal or operating device indicates that the operator must refer to an explanation in the Op

Strona 15

4 382860 Ver. 2.1 09/04 SPECIFICATIONS General Specifications Display One Main and three Sub 3-3/4-digi

Strona 16

5 382860 Ver. 2.1 09/04 Mode Measuring Range Accuracy Resolution 4kHz 1Hz 40kHz 10Hz 400kHz 100Hz 4M

Strona 17

6 382860 Ver. 2.1 09/04 METER DESCRIPTION UFunction Keys: • Power ON/OFF Key • FUNCTION Select Key •

Strona 18 - PC INTERFACE

7 382860 Ver. 2.1 09/04 OPERATING INSTRUCTIONS Quick Start • Connect the test leads to the meter • Pres

Strona 19 - MAINTENANCE

8 382860 Ver. 2.1 09/04 • mA-Measuring Socket For DC/AC mA current measurements below 400mA, insert the

Strona 20 - Warranty

9 382860 Ver. 2.1 09/04 MEM (Memory): Up to 10 measurements (0 to 9) can be stored and recalled. Press th

Komentarze do niniejszej Instrukcji

Brak uwag